Modules

87 results

Aerospace Lab Courses87

Biomedical Materials and TechnologiesNo ratings for this module yet.Lab Courses - GeneralIn the seminar you deal with novel materials and procedures relevant to biological and medical questions. You independently work out a current topic from Materials Science / Biomedical Engineering and present the results in English.4 ECTSruns this semesterMW2332CAD im Flugzeugbau/CATIA V5No ratings for this module yet.Lab Courses - GeneralIn the internship you create a complete CAD model of a Beechcraft Baron with CATIA V5. In the end you will be able to use the most important software modules confidently, design parts and assemblies parametrically, model free-form surfaces, and derive norm-compliant engineering drawings.4 ECTSruns this semesterMW0265CFD-Auslegung von TurbomaschinenNo ratings for this module yet.Lab Courses - GeneralYou will learn the procedure and the application of numerical flow simulations (CFD) for the aerodynamic design and evaluation of turbomachinery. Using an axial compressor example, you will carry out a design, assess the operating behavior with 3D calculations, and analyze occurring flow phenomena.4 ECTSruns this semesterMW0690Computational Thermo-Fluid DynamicsNo ratings for this module yet.Lab Courses - GeneralYou gain an overview of numerical methods for solving heat and thermofluid dynamics problems and learn good programming practices in Matlab. By the end of the course you will be able to analyze physical and mathematical properties of the relevant partial differential equations and to implement appropriate numerical algorithms to solve typical heat transfer problems.4 ECTSruns this semesterMW2134Control and Simulation of Rocket Hopper DemonstratorNo ratings for this module yet.Lab Courses - GeneralYou work on modeling, simulation and control of a Cold-Gas rocket engine (Rocket Hopper) and implement the developed controller in software and hardware. In the end you can build a simulation environment with ODE-based and lumped-parameter models, use Ecosim Pro / ESPSS, design controls (PID, MPC, RL) and practically test them in a high-pressure gas test campaign.4 ECTSruns this semesterED110129
82 more in Aerospace Lab CoursesCyber-Physische Produktionssysteme in der Smart FactoryNo ratings for this module yet.Lab Courses - GeneralIn the module you will learn how networked factories (Smart Factory / Industry 4.0) are built and operated data-driven. You will acquire practical skills in PLC programming, use of low-cost sensors, data exchange with OPC UA, as well as storage and visualization of production data and KPIs.4 ECTSruns this semesterMW2254Design of Wind FarmsNo ratings for this module yet.Lab Courses - GeneralYou learn practice-oriented methods for planning and optimizing wind farms. You practice simulations of wake effects with FLORIS, evaluate performance and costs with LandBOSSE, and develop a design and optimization process to minimize the costs of wind energy.5 ECTSruns this semesterED180012Electrical Energy Storage LabNo ratings for this module yet.Lab Courses - GeneralIn this laboratory internship you deepen experimental methods for the electrical and thermal characterization of energy storage, mainly batteries. In the end you will be able to measure standard key figures, practically test battery systems, create simple models and scientifically evaluate measurement results.6 ECTSruns this semesterEI73631Experimentelle StrömungsmechanikNo ratings for this module yet.Lab Courses - GeneralYou will learn to systematically investigate fluid-mechanics questions using experimental methods. In the end you will be able to plan and conduct experiments, evaluate measurement results, and critically assess their sensitivity and measurement errors.4 ECTSruns this semesterMW0305Experimentelle Untersuchung von RaumfahrtantriebenNo ratings for this module yet.Lab Courses - GeneralYou plan, conduct, and evaluate experimental test campaigns on test rigs for space propulsion. You will learn the construction and function of such test rigs, relevant physical fundamentals (including compressible flows, H2/O2 combustion), data acquisition and analysis, and safety aspects when handling hazardous substances.4 ECTSruns this semesterED110092FEM-Anwendung im TurbomaschinenbauNo ratings for this module yet.Lab Courses - GeneralYou receive an application-oriented introduction to the workflow of a finite element simulation (FEM) using the structural design of an axial compressor as an example. You model a 3D component, run a simplified flight cycle, analyze forces, stresses and temperatures, and examine the effects of rotational speed and temperature on natural frequencies (Campbell diagram). In the end you can independently handle simple structural analysis tasks with ABAQUS/CAE and interpret the results.4 ECTSruns this semesterMW2121Flight Guidance LabNo ratings for this module yet.Lab Courses - GeneralYou will learn the fundamentals of operational work in commercial air transport aircraft while flying under instrument flight rules. By the end you can safely perform basic cockpit procedures, checklists, radio navigation and typical instrument approaches and demonstrate practicable procedures as Pilot Flying or Pilot Not Flying.4 ECTSruns this semesterMW0275Flight Testing LabNo ratings for this module yet.Lab Courses - GeneralYou will learn the basics of flight test technology using small propeller aircraft as an example. The module covers both performance and flight characteristics. In the end you will be able to perform qualitative and quantitative assessments of an aircraft in these areas.4 ECTSruns this semesterMW0276Hochschulpraktikum: Grundlagen Innovativer Konstruktionsmethoden für die Additive FertigungNo ratings for this module yet.Lab Courses - GeneralYou will learn digital design principles and the complete process chain of additive manufacturing (AM). The module provides CAD and simulation practice, advanced design methods such as topology optimization, as well as the assessment of technical and economic aspects of AM components. In the end you will be able to select suitable AM processes, design lightweight, manufacturable components, and prepare digital build jobs.4 ECTSruns this semesterED170021Lab Course Energy Systems for MSPENo ratings for this module yet.Lab Courses - GeneralYou work in lab experiments on various topics of energy and power plant technology, from fuel analyses through temperature measurements and gasification to process optimization and plant operation. In the end you will be able to apply measurement methods and analysis tools, assess the impact of component and parameter changes on power plant processes, and develop optimization strategies.5 ECTSruns this semesterMW1869Lab Course Mobile Computer VisionNo ratings for this module yet.Lab Courses - Bachelor SpecificYou learn the basics of modern computer vision systems with neural networks and practice practical deployment up to embedding on embedded hardware. By the end you will be able to design, train, evaluate and deploy your own deep learning CV system for inference on current FPGAs.4 ECTSruns this semesterED110135MATLAB/Simulink for Computer Aided Engineering LabNo ratings for this module yet.Lab Courses - GeneralYou will pragmatically learn to use MATLAB and Simulink as well as their important toolboxes for engineering applications. In the end you will be able to independently develop simulation models and control systems and generate code from MATLAB/Simulink, as well as use physical models (e.g. Simscape).4 ECTSruns this semesterMW2313Mobile Robotik in der IntralogistikNo ratings for this module yet.Lab Courses - GeneralYou will learn application fields and fundamental building blocks of mobile robots in intralogistics and apply them. By the end you will be able to explain technology, kinematics, localization, navigation and machine perception in the intralogistics context and implement simple solutions with a BrickPi-based controller and Lego Mindstorms EV3.4 ECTSruns this semesterMW2438Optimal Control LabNo ratings for this module yet.Lab Courses - GeneralYou work practically with methods for formulating and solving optimal control problems in engineering sciences. In the practicum you implement and solve optimal control problems in MATLAB, learn modeling and simulation of dynamic systems as well as numerical optimization methods such as multiple shooting and collocation.4 ECTSruns this semesterED110136Planung intralogistischer Systeme im internationalen KontextNo ratings for this module yet.Lab Courses - GeneralYou work on a practice-oriented case study on intralogistics in an international context in collaboration with Chinese students. You capture and analyze real data at a German company in China, develop planning options with suitable methods, and evaluate/select the best solution for a given intralogistics problem.4 ECTSruns this semesterMW2315Praktikum Experimentelle AntriebsforschungNo ratings for this module yet.Lab Courses - GeneralYou conduct practical experiments on fuel cells, internal combustion engines and electrical machines, you learn to set up test rigs, collect and analyze measurement data. At the end you can understand test setups, process measurement data, and place the results in the context of current trends in drive research.4 ECTSruns this semesterED150042Praktikum Finite Elemente Methode in der Luft- und RaumfahrtNo ratings for this module yet.Lab Courses - GeneralYou will receive a practical introduction to the Finite Element Method (FEM) with a focus on applications in aerospace. You will work with industrial standard software (MSC Nastran / Optistruct), learn the structure and typical errors of FE models, and by the end of the course you will be able to create, analyze, and evaluate simple models.4 ECTSruns this semesterED110174Praktikum Regenerative EnergienNo ratings for this module yet.Lab Courses - GeneralYou will conduct six laboratory experiments on different renewable energy technologies (solar thermal, photovoltaics, biogas, fuel cells, fuel analysis, biomass gasification). In the end you will understand the structure and operating principles of the systems, be able to apply measurement and analysis methods, and technically evaluate the technologies as well as present the results scientifically in reports.4 ECTSruns this semesterMW0801Praktikum Vaskuläre SystemeNo ratings for this module yet.Lab Courses - GeneralYou receive a practical insight into the manufacture, testing and application of cardiovascular implants and learn the basics of the human cardiovascular system. In the end you will be able to carry out cell culture and blood tests, assess biological reactions to implants and understand clinical processes in cardiovascular interventions.4 ECTSruns this semesterMW0721Simulation of Thermofluids with Open Source ToolsNo ratings for this module yet.Lab Courses - GeneralYou will learn to model, solve, and visualize thermofluid dynamic problems with OpenFOAM®. The course takes a practice-oriented (learning by doing) approach to installation, solver structure, adaptation and compilation of OpenFOAM® solvers, as well as post-processing with ParaView. In the end, you can independently handle various CFD cases (heat transfer, incompressible/compressible, turbulent, multiphase, combustion, dispersed flows).4 ECTSruns this semesterMW1277Think. Make. Start.No ratings for this module yet.Lab Courses - GeneralYou work in interdisciplinary teams on a two-week, practice-oriented development project to find innovative product ideas, validate them early prototypically, and lay the groundwork for a potential founding. In the end you will be able to apply user-centered design principles, test market-relevant hypotheses, and present a functional prototype along with a founding idea.6 ECTSruns this semesterMW2245Topologie-OptimierungNo ratings for this module yet.Lab Courses - GeneralIn this module you will learn the fundamentals and practical methods of topology optimization in 2D. After completion you will be able to apply numerical procedures, write your own MATLAB codes, interpret optimized structures and further develop them into manufacturable models.4 ECTSruns this semesterED160015UAV Operations LabNo ratings for this module yet.Lab Courses - Bachelor SpecificIn this internship you will learn the safe and legally compliant operation of unmanned aerial vehicles (UAV/UAS). In the end you will be able to fly drones independently, apply operational procedures and assess flight-safety-relevant aspects such as meteorology, navigation and human performance.4 ECTSruns this semesterED110100Wind Tunnel Testing of Wind TurbinesNo ratings for this module yet.Lab Courses - GeneralYou will learn methods and techniques for experimental measurements in the wind tunnel with application to wind turbines. You will learn how wind tunnel models of wind turbines are scaled and designed, including aerodynamics, electro-mechanical setup, as well as sensor and data acquisition. In the end you will be able to analyze measurement data from wind tunnel experiments and make statements about performance and wake behavior of wind turbines.4 ECTSruns this semesterMW2285Zerstörungsfreie Werkstoffprüfung für IngenieureNo ratings for this module yet.Lab Courses - GeneralYou will learn nondestructive testing methods and how to apply them: theory, practical experiments and evaluation. In the end you will be able to explain the physical fundamentals and material requirements of various testing methods, analyze test tasks and select appropriate methods as well as evaluate measurement results.4 ECTSruns this semesterBGU640103D Printing for Bioelectronics and Biomedical ApplicationsNo ratings for this module yet.Lab Courses - GeneralYou will learn the fundamentals of modern 3D printing methods with a focus on stereolithographic methods and implement this knowledge practically. In the block course you design, print and post-process a 3D component and subsequently use it in a laboratory experiment from the fields of bioelectronics or biomedical engineering. In the end you will be able to operate printing processes, verify printed structures and apply them in an experimental context.6 ECTSno date this semesterEI7488Applied Data Analytics and Machine Learning in PythonNo ratings for this module yet.Lab Courses - GeneralYou will learn how to practically apply Python and common frameworks for data analysis and for machine learning. The focus is on modelling and implementing ML solutions — especially reinforcement learning and unsupervised learning — for application-oriented use cases from control engineering, process control and quality monitoring.4 ECTSno date this semesterED160003Auslegung und Simulation von MikrosatellitenNo ratings for this module yet.Lab Courses - GeneralIn this module you will learn about the structure, subsystems and typical communication mechanisms of microsatellites and you will apply simulation and testing methods. You will practice using the FLP2 testbench (on-site or remote demonstration) and independently develop a satellite simulation including demonstration and report in two-person projects.4 ECTSno date this semesterLRG2400Automated Agricultural Machines - Lab courseNo ratings for this module yet.Lab Courses - GeneralYou work practically on automation, control, positioning and navigation for agricultural machines. In the end you can solve simple automation tasks independently, use appropriate software (primarily MATLAB) and evaluate measurement data from positioning systems.5 ECTSno date this semesterWZ0608Biosensors and BioelectronicsNo ratings for this module yet.Lab Courses - GeneralYou will get an introduction to biosensors and bioelectronics: from biological recognition elements and physical transduction mechanisms to concrete sensor architectures (enzymatic, DNA-, immun-, and cell-based sensors) as well as point-of-care and in-vivo applications. By the end you will be able to describe common biosensor concepts, understand electrochemical measurement principles, and analyze bioelectronic experiments including stochastic or single-molecule methods.6 ECTSno date this semesterEI7474Charakterisierung von VerbundwerkstoffenNo ratings for this module yet.Lab Courses - GeneralYou will learn how to experimentally determine and interpret the mechanical and thermal properties of composite materials. The module covers test methods, equipment and sample preparation as well as the analysis of typical tests (tension, compression, bending, DSC, DMA, rheometer). In the end you will be able to select appropriate test procedures, conduct experiments yourself and assess materials based on the determined properties.4 ECTSno date this semesterED110112Combustion ModelingNo ratings for this module yet.Lab Courses - GeneralIn this module you work in small groups on numerical questions around combustion processes in aircraft and space propulsion engines. You will learn to apply model approaches for the interaction of turbulence and chemical reactions, evaluate thermal loads in combustion chambers, and investigate coupled temperature and flow fields.4 ECTSno date this semesterLRG2701Composite-Bauweisen - PraktikumNo ratings for this module yet.Lab Courses - GeneralYou deal with material selection, manufacturing technologies and structural requirements for fiber-reinforced composite parts. On concrete components from various industries you learn to evaluate technical and economic aspects and, in the end, can select materials and manufacturing processes appropriate to a use case.4 ECTSno date this semesterMW1068Cyber-Physical Systems Lab: Autonomous ApplicationsNo ratings for this module yet.Lab Courses - GeneralYou will gain hands-on experience with autonomous vehicles at a 1:10 scale and learn the basic measurement, planning, and control aspects of such cyber-physical systems. By the end you will be able to build, operate, and use semi-functional prototypes for testing algorithms and sensors, as well as assess the challenges and solutions in the field of autonomous driving.4 ECTSno date this semesterMW2426Deep Learning for PDEs in Engineering PhysicsNo ratings for this module yet.Lab Courses - GeneralIn this internship you will learn how deep learning methods are used to solve partial differential equations (PDEs) in engineering applications. By the end you will be able to develop and apply neural networks with PyTorch to solve parametrized PDE problems, e.g. from fluid mechanics, materials science, or heat transfer.4 ECTSno date this semesterED140023Design / Build / FlyNo ratings for this module yet.Lab Courses - Bachelor SpecificYou work in a team on the conception, design, and construction of an unmanned aircraft (UAV). At the end of the semester you have developed a design-ready concept, produced a rapid prototype, and flown the aircraft to evaluate its performance.4 ECTSno date this semesterED110169Design Challenge: Innovative Konstruktionsmethoden für die Additive FertigungNo ratings for this module yet.Lab Courses - GeneralYou will learn innovative design methods for additive manufacturing and apply them practically. The module covers digital design concepts and the entire process chain of additive manufacturing; you will assess technical and economic aspects and prepare digital build jobs for different technologies. In the end you will be able to optimize production-ready parts with CAD and simulation tools and select suitable AM processes for polymer and metal parts.4 ECTSno date this semesterED160058Design, Construction, and Testing of a Fully Actuated Multirotor DroneNo ratings for this module yet.Lab Courses - Bachelor SpecificIn this module you will learn the fundamentals for design, control engineering and trajectory planning of fully actuated multirotor drones. You will implement what you have learned in your own design, realize it in a group, and test and optimize the built drones in the flight lab.4 ECTSno date this semesterED110137Einführung in die nukleare Sicherheitsanalyse von Kernreaktoren mit ReaktorsicherheitssoftwareNo ratings for this module yet.Lab Courses - GeneralYou will receive a practice-oriented introduction to nuclear safety analysis of light water reactors using professional reactor safety software. You will create reactor models, perform steady-state and transient simulations, and learn to visualize and interpret the results.4 ECTSno date this semesterMW1104Einführung in die parallele Hochleistungsprogrammierung - Ein Praxiskurs für IngenieureNo ratings for this module yet.Lab Courses - GeneralYou learn how to efficiently implement numerical methods for engineering problems on modern parallel computers. In the course you will progressively develop a finite-difference solver for the heat equation and apply various parallelization techniques (C++ threads, SIMD, OpenMP, MPI) on shared- and distributed-memory architectures.4 ECTSno date this semesterED140022Engineering Solutions for Biomedical ProblemsNo ratings for this module yet.Lab Courses - GeneralYou engage in multidisciplinary, engineering approaches to solve biological and medical questions. In the end you can independently research a current topic from Bio-/Medical Engineering and present it in English in a 30-minute lecture.4 ECTSno date this semesterMW1829Fertigungstechnologien für Composite-BauteileNo ratings for this module yet.Lab Courses - GeneralYou develop manufacturing processes for composite parts from the areas of preforming and resin infiltration/impregnation. You practice both the draping and automated layup of fibers as well as procedures for resin infiltration (e.g., hand lay-up, VARI, VAP, RTM) and implement the processes on simple geometries in practice. In the end you can assess suitable manufacturing concepts and produce components as well as analyze the produced test samples.4 ECTSno date this semesterMW1381Finite Elemente Methode (FEM) mit Schwerpunkt Luft- und RaumfahrtstrukturenNo ratings for this module yet.Lab Courses - GeneralYou receive a compact introduction to the theoretical fundamentals of the Finite Element Method (Statics and Dynamics) with a focus on applications in aerospace. You will learn to approximate technical structures with simple FEM models, to use simulation tools, and to interpret results as well as to adapt modeling as needed.4 ECTSno date this semesterMW1268Future Transportation - PraktikumNo ratings for this module yet.Lab Courses - GeneralYou work in small teams on concrete research projects for future mobility. In the internship you tackle topics on drive and control systems, operation management, and mechanical or floating structures, and you acquire practical skills in commissioning, testing, and control design.4 ECTSno date this semesterLRG6003HelicopterNo ratings for this module yet.Lab Courses - Bachelor SpecificYou develop and optimize the preliminary design of an eVTOL/helicopter taking into account flight physics and performance calculation. In the end you can translate requirements into a design loop, implement it as a Python tool, and visually present the design.4 ECTSno date this semesterLRG0121Hochschulpraktikum: Extended Reality Lab Additive FertigungNo ratings for this module yet.Lab Courses - GeneralYou will learn the basics of Extended Reality (Virtual Reality and Augmented Reality) and gain insights into selected additive manufacturing processes. In the lab you will practice handling VR systems, carry out virtual building tasks, and work in groups on practice-oriented topics that you will present and discuss.4 ECTSno date this semesterED160063IFR-Praktikum HubschrauberNo ratings for this module yet.Lab Courses - GeneralYou learn the fundamentals of instrument flight in a helicopter: from cockpit introduction over radio and navigation (NDB, VOR, GPS) to approach procedures (ILS, VOR, GPS). In the end you will be able to apply standard instrument flight procedures, read instrument flight charts, work through checklists and assess pilot workload.4 ECTSno date this semesterMW1450Kleben in Theorie und PraxisNo ratings for this module yet.Lab Courses - GeneralYou learn the theory and practice of bonding: from mechanics and material behavior to process steps such as surface preparation, dosing and curing to quality assurance and application examples (Automotive, aerospace, special applications). In the end you will be able to create adhesive joints, test them mechanically and assess their suitability for concrete applications.4 ECTSno date this semesterMW2321Klinische Anwendungen der BiomechanikNo ratings for this module yet.Lab Courses - GeneralIn the seminar you will engage with current publications from biomechanics and discuss their clinical application possibilities. In the end you will be able to independently develop a research topic and present the results in English, as well as critically assess the clinical potential of the introduced innovations.4 ECTSno date this semesterMW2333Konstruktion für die Additive FertigungNo ratings for this module yet.Lab Courses - GeneralYou will receive a practice-oriented introduction to component design for additive manufacturing. You will go through the complete process chain from component concept to build job preparation and manufacturing, and deepen your knowledge in an iterative design project with rapid prototyping.4 ECTSno date this semesterMW2475Konstruktion von Composite-Strukturen mit Catia V5No ratings for this module yet.Lab Courses - GeneralYou will learn to constructively design fiber-reinforced composite structures while considering special features such as draping, bonding, and the orthotropic material behavior. Specifically, you will practice applying construction-specific guidelines and implement them in a practical way with the CAD system CATIA V5, so that you can independently create composite components from individual part design to drawing.4 ECTSno date this semesterMW1383Lebenszyklusanalyse mit PythonNo ratings for this module yet.Lab Courses - GeneralIn this module you will learn the basics of object-oriented programming with Python and their application for Life Cycle Assessments (LCA). You will learn the theoretical principles of an LCA, build a simple LCA model with real data, and evaluate and discuss ecological footprints using the Python library brightway.4 ECTSno date this semesterED150023LuftverkehrsszenarienNo ratings for this module yet.Lab Courses - GeneralYou will work on a concrete question in an air traffic scenario project, deepen your understanding of the interconnections in the air traffic system, and practically learn to apply scenario technology as a strategic method. In the end you will be able to use scenario technology, present results in a structured way, and conduct group work professionally.4 ECTSno date this semesterMW0747Magnetic Levitation LabNo ratings for this module yet.Lab Courses - GeneralYou deal with magnetic levitation and build a floating system in a lab experiment. You design 3D-printed components, implement simplified electrical circuits, program microcontrollers, integrate sensors and realize filter and control algorithms. In the end you can explain the physical principles and evaluate the interactions of the involved technical disciplines in hardware systems.4 ECTSno date this semesterED110239Modular Robot DesignNo ratings for this module yet.Lab Courses - GeneralYou will learn the development process of modular robots and design your own robot module for a specific task in the practicum. You will simulate your design to ensure the goal, build the mechanics and electronics, bring the module into operation and test its performance. In the end you will present your project at a Demo Day.4 ECTSno date this semesterED160048Numerical Thermo-Fluids - From Differential Equations to Deep LearningNo ratings for this module yet.Lab Courses - GeneralYou will learn numerical algorithms and good programming principles to solve thermo-fluid dynamic and thermal engineering problems. In addition to classical numerical methods, you will receive an introduction to Machine Learning and Deep Learning. In the end you can implement basic algorithms in MATLAB or use existing MATLAB functions and create and train simple neural networks with the Deep Learning Toolbox.4 ECTSno date this semesterMW2133Partikuläre NanotechnologieNo ratings for this module yet.Lab Courses - GeneralIn the laboratory internship you will work out the fundamentals of synthesis and characterization of nanoparticulate systems. You will especially prepare superparamagnetic colloids, measure particle sizes and specific surfaces, and investigate sorption properties as well as chemical composition. In the end you will be able to analyze nanoparticles with common spectroscopic and physical methods and you will know industrial production and analysis techniques.4 ECTSno date this semesterMW2168Photogrammetric Data AcquisitionNo ratings for this module yet.Lab Courses - Bachelor SpecificYou will learn the fundamentals of photogrammetric data acquisition for 3D reconstruction of scenes, with a focus on UAV photogrammetry. In the end you will be able to plan and execute complete workflows — from data capture (including reference measurements) over photogrammetric processing to the analysis and quality assessment of the results for environmental questions.4 ECTSno date this semesterED110140Practical Course Biological Life Support SystemsNo ratings for this module yet.Lab Courses - Bachelor SpecificYou learn to culture and operate microalgae, mainly in the context of life-support systems. In the end you can build and operate microalgae cultures, plan and conduct experiments, and evaluate culture state and growth.4 ECTSno date this semesterED110160Practical Course Simulation of Life Support SystemsNo ratings for this module yet.Lab Courses - Bachelor SpecificYou will learn the structure, tasks and subsystems of life support systems and work with simulation tools to model, compare and evaluate systems. In the end you will be able to build a life support system in a simulation environment, evaluate configurations for a mission scenario, and analyze the behavior of material and heat flows with dynamic simulations.4 ECTSno date this semesterED110159Praktikum Numerische BiomechanikNo ratings for this module yet.Lab Courses - GeneralYou learn how biological systems can be modeled and simulated realistically with the Finite Element Method (FEM). In the end you can reconstruct patient-specific geometries from medical image data, generate meshes, perform FE simulations, and evaluate the results for the assessment of, e.g., rupture risks.4 ECTSno date this semesterMW2247Praktikum Numerische StrömungsakustikNo ratings for this module yet.Lab Courses - GeneralYou work on numerical procedures for simulating sound propagation in stationary and flowing media (1D/2D) based on concrete projects. In the end you will be able to apply LEE-based finite-difference methods, assess their accuracy, and evaluate the sensitivity of results to physical and numerical modeling.4 ECTSno date this semesterMW2268Praktikum Windkraftanlagen SimulationNo ratings for this module yet.Lab Courses - GeneralYou acquire fundamentals in model-based simulation and design of modern multi-megawatt wind turbines. In the end you will be able to simulate wind turbines with the aeroelastic code Cp-Lambda in various operating states, evaluate their performance and loads, and identify design problems and develop improvement proposals.4 ECTSno date this semesterMW2181Praktisches Deep LearningNo ratings for this module yet.Lab Courses - GeneralYou will gain a practical introduction to Deep Learning and implement central algorithms yourself. At the end you will know various deep learning models (e.g. deep nets, CNNs, RNNs/LSTM, autoencoders, GANs, VAEs) and be able to apply them to real datasets with PyTorch, as well as improve deep-learning pipelines.4 ECTSno date this semesterMW2451Praxisseminar Experimentelle SchwingungsanalyseNo ratings for this module yet.Lab Courses - GeneralIn this module you will conduct experimental measurements and evaluations for vibration analysis. You will learn measurement methods (e.g., strain gauges, impulse hammer), signal processing (FFT, STFFT) as well as modal analysis, and you will be able to experimentally determine and evaluate eigenfrequencies, mode shapes and frequency response data.4 ECTSno date this semesterED160050RaumfahrtelektronikNo ratings for this module yet.Lab Courses - GeneralYou will learn the practice-oriented development and testing of spacecraft electronics: from measurement and metrology techniques over microcontroller software to breadboard and PCB implementation. In the end you will be able to use measurement devices, develop embedded C programs and finite-state machines, build microcontroller platforms, and realize a prototype system for a mission task.4 ECTSno date this semesterMW2381Raumfahrzeug Thermalanalyse und -TestNo ratings for this module yet.Lab Courses - GeneralYou will learn the basics of thermal analysis and testing of spacecraft. You will create and compute thermal models (initially in Matlab, later in Thermal Desktop), carry out thermal-vacuum tests in the laboratory, and adjust models based on measured data. In the end, you will practically and computationally perform thermal development and qualification steps for spacecraft and components.4 ECTSno date this semesterED110072Satellite Navigation LaboratoryNo ratings for this module yet.Lab Courses - GeneralYou implement in six practical sessions the fundamental building blocks of a satellite navigation receiver. In the end you will be able to program the individual receiver blocks, study their convergence and complexity, and assess the quantities and corrections important for satellite navigation.6 ECTSno date this semesterEI5028Simplex: Fehlertolerante Kontrollstrategie für echtzeitfähige Cyber-Physische Systeme - LaborpraktikumNo ratings for this module yet.Lab Courses - GeneralIn the laboratory internship you will learn concepts and methods for fault-tolerant control of real-time capable cyber-physical systems using the Simplex architecture. In the end you will be able to model and linearize systems, design feedback controllers, determine safety bounds with Lyapunov analysis, and implement and test control logic.4 ECTSno date this semesterMW2419Simulation turbulenter Strömungen auf HPC-SystemenNo ratings for this module yet.Lab Courses - GeneralYou learn how to numerically model and simulate turbulent, incompressible flows on high-performance computers (HPC). This includes fundamentals of the RANS equations, turbulence modeling, numerical discretization and solution methods, as well as parallelization and visualization of simulation data. In the end you can analyze corresponding algorithms, implement them in C++ and run on distributed systems, and present results to a technical audience.4 ECTSno date this semesterMW2048Solarthermisches PraktikumNo ratings for this module yet.Lab Courses - GeneralYou will work in small groups on a current research project of the chair in the field of solar thermal energy. The goal is for you to independently familiarize yourself with a new question, work in a team, and present the results in written and oral form.4 ECTSno date this semesterMW2116Spacecraft Computers, Software, and DataNo ratings for this module yet.Lab Courses - Bachelor SpecificYou will learn the structure, function, and typical performance characteristics of onboard computers, onboard data handling and telemetry/telecommand subsystems of satellites. You will practice programming simple flight software, using data buses and protocols, as well as measuring and characterizing signals and RF components in the lab.4 ECTSno date this semesterED110154Spacecraft OperationsNo ratings for this module yet.Lab Courses - GeneralYou learn the fundamentals and practice of spacecraft operations management: from mission phases, roles and procedures to ground stations and communication basics up to flight dynamics, onboard systems and anomaly analysis. In the end you will be able to describe mission operations processes, evaluate communication and ground station designs, apply simple orbit maneuvers and link budgets, as well as analyze telemetry anomalies in a fault-tolerant manner and propose countermeasures.4 ECTSno date this semesterED110165Systems Engineering - AdvancedNo ratings for this module yet.Lab Courses - GeneralIn this project seminar you apply systems engineering principles to a stratospheric balloon mission. In the end you will derive and manage requirements, design a systems engineering plan as well as a lifecycle for a spaceflight-adjacent system, plan, execute and evaluate a balloon mission, and present project results and defend them in reviews.4 ECTSno date this semesterED110176Technologiebewertung in der LuftfahrtNo ratings for this module yet.Lab Courses - GeneralYou learn how product decisions in aviation are evaluated and prepared: from identifying customer needs through requirements analysis and innovation management to assessing technology potentials. With scenario technique you practice considering strategic uncertainties and making robust decisions for the civil aviation market.4 ECTSno date this semesterMW2166Technology Entrepreneurship LabNo ratings for this module yet.Lab Courses - GeneralYou work in teams on the development of technological business ideas: from identifying opportunities to team formation and the creation of an evaluation plan. In the end you will be able to analyze opportunity processes and team development, apply coaching tools, and create an Opportunity Assessment Plan.6 ECTSno date this semesterWI000813Thermofluiddynamisches PraktikumNo ratings for this module yet.Lab Courses - GeneralIn the Thermofluiddynamics practical course you work in a small group (about 6 people) on a current research question of the chair. You will learn to independently familiarize yourself with new tasks, to work in a team, and to experimentally develop, document and present results.4 ECTSno date this semesterMW0312Transiente Simulation von RaumfahrtantriebssystemenNo ratings for this module yet.Lab Courses - GeneralYou engage with the transient simulation of rocket propulsion systems. You will learn how rocket engines and their main components function, how to model propulsion systems systemically and transiently simulate with Ecosim/ESPSS, and how to apply optimization methods in the product development process.4 ECTSno date this semesterED110093UAS Flight Control LabNo ratings for this module yet.Lab Courses - GeneralYou develop and test control and navigation algorithms for unmanned aerial systems (UAS) and implement these practically on a real quadrotor. In the end you will be able to create a simulation model, identify model parameters, and implement and test navigation and discrete control algorithms.4 ECTSno date this semesterLRG1366UAS LabNo ratings for this module yet.Lab Courses - Bachelor SpecificYou work practically on central challenges for the flight of drones. Based on a simple quadcopter, you gradually build a simulation environment in MATLAB/Simulink, model the flight behavior, design controls, perform system identification, and plan trajectories and paths.4 ECTSno date this semesterED110166Verbrennungstechnisches PraktikumNo ratings for this module yet.Lab Courses - GeneralIn the Combustion Technology Practical you work in a small group on a current research problem from the solar area of the chair. You learn to independently dive into a new, specialized task, work in a team, and prepare the results in documentation and presentation.4 ECTSno date this semesterMW2138Visualisierungstechniken in der Numerischen Mechanik PraktikumNo ratings for this module yet.Lab Courses - GeneralIn the internship you will learn how to process and present numerical simulation results (e.g., from finite element or particle methods) with modern visualization tools. The focus is on the use of the open-source software ParaView, including the creation of graphics, videos, as well as three-dimensional and interactive visualizations (e.g., for VR). In the end you will be able to visualize simulation results independently and tailor them for analysis.4 ECTSno date this semesterMW2382
78 more modules match, but they are taught in German. Show themAdditive Fertigung in der GießereitechnikNo ratings for this module yet.Lab Courses - GeneralDu lernst, wie additive Fertigungsverfahren in der Gießereitechnik eingesetzt werden, um komplexe Formteile zu erzeugen und Gussformen bzw. Gießsysteme herzustellen. Am Ende kannst du geeignete Verfahren auswählen, 3D-Druck-Datensätze fertigungsgerecht aufbereiten und die Wirkung von Anschnitt und Gießsystemen beurteilen sowie Konstruktionen mittels Simulation prüfen.4 ECTSno date this semesterED160001Aerodynamik des Flugzeugs (Praktikum)No ratings for this module yet.Lab Courses - GeneralDu führst eigenständig Windkanalversuche zu verschiedenen Flugzeug‑aerodynamischen Fragestellungen durch. Du lernst Messverfahren (Sonden, Druckmessungen, Kraftmessungen, Stereo‑PIV) anzuwenden und die gemessenen Größen (Profil‑ und induzierter Widerstand, Abwind-/Nachlauffeld, Druckverteilungen, Wirbeldominanz) auszuwerten.4 ECTSno date this semesterMW0258Aeromechanische Modellierung von HubschrauberrotorenNo ratings for this module yet.Lab Courses - GeneralDu lernst, wie mechanische und aerodynamische Modelle von Hubschrauberrotoren aufgebaut, gekoppelt und programmtechnisch umgesetzt werden. Am Ende kannst Du verschiedene Modellierungsansätze anwenden, ihre Grenzen beurteilen und eine Trimmrechnung durchführen sowie Ergebnisse verifizieren.4 ECTSno date this semesterMW2234Angewandte FE-Simulation in Ur- und UmformtechnikNo ratings for this module yet.Lab Courses - GeneralDu lernst die Grundlagen der Finite-Elemente-Methode (FEM) und wendest sie praktisch auf Fertigungsprozesse wie Gießen, Umformen (insbesondere Blechumformung) und Schneiden an. Anhand gestellter CAD-Daten führst du eigenständig Simulationen mit gängigen FE-Programmen durch und verstehst so die Anwendung der FEM in diesen Bereichen. Die Kenntnisse sind auf weitere Felder der FE-Simulation übertragbar.4 ECTSruns this semesterMW0678Angewandtes Sound Design durch StrukturoptimierungNo ratings for this module yet.Lab Courses - GeneralIn dem Modul lernst Du, wie Geometrie und Materialeigenschaften das Schwingungsverhalten und die akustische Abstrahlung technischer Strukturen beeinflussen. Du erstellst parametrische FE-Modelle in COMSOL, wendest Strukturoptimierung zur akustischen Gestaltung an und machst Ergebnisse mittels Auralisation hörbar und bewertbar.4 ECTSno date this semesterMW2325Assistenzsysteme für die älter werdende GenerationNo ratings for this module yet.Lab Courses - GeneralDu beschäftigst dich mit medizinischen Hintergründen altersbedingter Funktionseinschränkungen und Krankheiten, bekommst Einblick in den Pflegealltag und lernst technische Lösungsansätze für konkrete Einschränkungen kennen. Am Ende hast du ein Grundverständnis der relevanten medizinischen Zusammenhänge, kennst die Aufgaben im Pflegebereich und bist mit wichtigen Forschungsansätzen vertraut.4 ECTSno date this semesterMW1351Blechverarbeitung im Fahrzeugbau PraktikumNo ratings for this module yet.Lab Courses - GeneralDu erhältst einen praxisnahen Überblick über den Einsatz von Blechwerkstoffen im Fahrzeugbau. Du lernst sowohl reale Umformprozesse als auch deren Simulation kennen, inklusive relevanter Messmethoden, Werkzeugbau, Methodenplanung und Qualitätssicherung im Presswerk. Eine Exkursion ergänzt die praktischen Einblicke.4 ECTSruns this semesterMW0438CAD-Konstruktion und Methodik (Blockpraktikum)No ratings for this module yet.Lab Courses - GeneralDu lernst, wie CAD-Modelle so aufgebaut werden, dass sie für nachfolgende Prozesse optimal nutzbar sind. Dabei erwirbst Du Fertigkeiten zur Integration prozessrelevanter Informationen, zur Standardisierung von Modellen und zur Automatisierung von Arbeitsabläufen unter Berücksichtigung der Anforderungen des Werkzeugbaus. Am Ende kannst Du CATIA V5 zielgerichtet für Konstruktion und Methodik einsetzen.4 ECTSno date this semesterMW1986Computergestützter RegelungsentwurfNo ratings for this module yet.Lab Courses - GeneralIm Praktikum lernst du, regelungstechnische Entwürfe an realen mechatronischen und verfahrenstechnischen Laboraufbauten mit MATLAB/Simulink umzusetzen. Du übst Modellbildung, Parameteridentifikation und verschiedene Reglerentwürfe (z. B. PID, Zustandsregelung, robuste Ansätze) und bewertest anschließend Verhalten und Performanz der geregelten Systeme.4 ECTSruns this semesterMW0541Echtzeitfähige Geräte und RoboterNo ratings for this module yet.Lab Courses - GeneralDu arbeitest mit einem Mikrocontroller (ATMEGA 64L) und einem kleinen Roboter (MA-VIN), der verschiedene Sensor- und Aktormodule besitzt. Du lernst, Echtzeitfähigkeit in eingebetteten Systemen praktisch umzusetzen: Motorsteuerung, Sensorintegration und Kommunikation (u. a. RS232). Am Ende kannst du einen Mikrocontroller programmieren und eigene Module zur Ansteuerung von Servomotoren per PWM entwickeln.4 ECTSruns this semesterMW0817Energietechnisches PraktikumNo ratings for this module yet.Lab Courses - GeneralIm Energietechnischen Praktikum führst Du sechs praxisnahe Versuche zu Mess-, Prozess- und Kraftwerkstechnik durch. Du lernst Messverfahren anzuwenden, Kraftwerksaufbau kennenzulernen und Prozesse mithilfe von Simulationstools zu optimieren; am Ende kannst Du experimentell arbeiten und einen ingenieurmäßigen Bericht verfassen.4 ECTSruns this semesterMW0270Entwicklung intelligenter verteilter eingebetteter Systeme in der Mechatronik - PraktikumNo ratings for this module yet.Lab Courses - GeneralIn diesem Praktikum vertiefst du die Inhalte der zugehörigen Vorlesung zur Entwicklung intelligenter verteilter eingebetteter Systeme in der Mechatronik durch praktische Arbeit an einer Laboranlage. Du lernst die grundlegende Programmierung von Fertigungsanlagen in der Automatisierungstechnik und setzt im Team aktuelle Forschungsansätze praktisch um.4 ECTSno date this semesterMW1982Ergonomisches PraktikumNo ratings for this module yet.Lab Courses - GeneralIm ergonomischen Praktikum ergänzt und vertiefst du die Vorlesung Grundlagen Human Factors/Ergonomics durch praktische Versuche. Im Fokus stehen Messtechnik und die Bewertung menschzentrierter Faktoren (z. B. Physiologie, Klima, Kognition) sowie Versuche zur Umweltergonomie. Am Ende kannst du objektive Mess- und Bewertungsverfahren der Arbeitswissenschaft und Biomechanik verstehen und situationsbezogen anwenden.4 ECTSruns this semesterMW0272Finite Elemente in der Werkstoffmechanik (Praktikum)No ratings for this module yet.Lab Courses - GeneralIn dem Praktikum lernst Du, eindimensionale Probleme der Kontinuums‑ und Werkstoffmechanik mit der Finite‑Elemente‑Methode zu diskretisieren und rechnerisch zu lösen. Du implementierst eine FE‑Lösung in einer objektorientierten Programmiersprache und wendest kommerzielle FE‑Software zur Simulation elastischer und ratenunabhängiger elasto‑plastischer Probleme an. Am Ende kannst Du einfache 1D‑Modelle selbst implementieren, Simulationen mit kommerziellen Werkzeugen durchführen und Ergebnisse beurteilen.4 ECTSno date this semesterMW0682Finite Elemente PraktikumNo ratings for this module yet.Lab Courses - GeneralDu lernst, wie die Finite-Elemente-Theorie praktisch angewendet wird, insbesondere mithilfe der kommerziellen Software Ansys. Am Ende kannst du FE-Modelle aufbauen (Geometrie, Vernetzung, Randbedingungen), lösen und grundlegende Fehlerquellen sowie Kopplungs- und Nichtlinearitätsaspekte in Simulationen beurteilen.4 ECTSno date this semesterMW0286Flight Control System LabNo ratings for this module yet.Lab Courses - GeneralDu lernst praktische Methoden, Prozesse und Werkzeuge zur Entwicklung von Avionik- und Flugregelungs-Systemen kennen. Am Ende kannst du Flugregelungsalgorithmen entwickeln und evaluieren, Softwarebausteine für Flugsteuerungscomputer implementieren sowie relevante Hard- und Softwaretests (z. B. Processor-/Hardware-in-the-Loop) durchführen.4 ECTSno date this semesterMW2084Flugversuche Idaflieg SommertreffenNo ratings for this module yet.Lab Courses - GeneralDu führst Flugversuche mit Segelflugzeugen beim Idaflieg Sommertreffen durch. Du lernst systematisch Flugeigenschaften zu beobachten, zu protokollieren und einfache Untersuchungen durchzuführen sowie an einem Sondermessprojekt mitzuwirken.no date this semesterMW1498Gerätekunde Chirurgie und Innere MedizinNo ratings for this module yet.Lab Courses - GeneralDu bekommst einen praktischen Einblick in die in Chirurgie und Innerer Medizin verwendeten Geräte und das grundlegende chirurgische Instrumentarium. Am Ende kennst du die Einsatzbereiche und Funktionsprinzipien wichtiger medizintechnischer Geräte, weißt, wie du dich im Operationssaal richtig verhältst und hast einen Überblick über Entwicklungen hin zu narbenlosen Operationsverfahren.4 ECTSno date this semesterME0278Hardware-in-the-Loop für MotorsteuergeräteNo ratings for this module yet.Lab Courses - GeneralDu vertiefst die praxisnahe Arbeit mit Motorsteuergeräten an einem Hardware-in-the-Loop (HiL)-Prüfstand. Du entwickelst, parametrisiert und testest Steuergerätefunktionen an einer echten Entwicklungs-ECU und arbeitest mit einem echtzeitfähigen Motorenmodell sowie den zugehörigen Sensoren und Aktoren.4 ECTSno date this semesterMW1021HochgeschwindigkeitstechnikNo ratings for this module yet.Lab Courses - GeneralDu lernst Grundlagen der Beschleunigung von Massen (mechanische, gasdynamische und elektrische Beschleuniger), Methoden zur Messung sehr schneller Vorgänge (z. B. Hochgeschwindigkeitsphotographie) sowie die Wechselwirkung von Materie bei Hochgeschwindigkeits-Einschlägen (Kraterbildung, Bumper-Shield). In Laborversuchen setzt du ausgewählte Experimente selbst um und wertest Messungen aus.4 ECTSno date this semesterMW0280Industrienahe FE-Analyse in der VibroakustikNo ratings for this module yet.Lab Courses - GeneralDu lernst, wie man virtuelle Modelle für strukturdynamische Probleme erstellt und bewertet, mit Schwerpunkt auf vibroakustischen Fragestellungen. Nach dem Modul kannst du Finite-Element-Modelle (insbesondere in ABAQUS/CAE) aufbauen, ihre Genauigkeit beurteilen und sie mithilfe bereitgestellter Messdaten validieren.4 ECTSruns this semesterMW2326Industrieroboter-PraktikumNo ratings for this module yet.Lab Courses - GeneralDu arbeitest praktisch mit Industrierobotern: von den Grundlagen über Programmierung bis zur Mensch‑Roboter‑Kollaboration und ROS‑basierten Anwendungen. Am Ende kannst du Roboter sicher bedienen, Programme erstellen, kamerabasierte Steuerung einsetzen und eine robotergestützte Automatisierungslösung planen und umsetzen.4 ECTSruns this semesterMW1022Konventionelle und additive Fertigungsverfahren für polymere WerkstoffeNo ratings for this module yet.Lab Courses - GeneralDu lernst konventionelle und additive Fertigungsverfahren für polymere Werkstoffe praktisch kennen. Im Praktikum führst du Compoundierung, Thermoformen und Pressen durch, stellst Filamente her und druckst Bauteile mit FDM und DLP; außerdem lernst du Electrospinning, Nachbearbeitung (Plasmabehandlung) sowie Klassifizierungs- und Charakterisierungsmethoden (Licht-/Rasterelektronenmikroskopie, Härte- und Zugprüfung) kennen. Am Ende kannst du die Verfahren bedienen, fertigungsgerecht konstruieren und Bauteile analysieren.4 ECTSruns this semesterMW0720Kraftwerkstechnisches Praktikum: Simulation und RegelungNo ratings for this module yet.Lab Courses - GeneralDu erhältst einen praktischen Einblick in Kraftwerkssimulation, Bedienung eines Kraftwerkssimulators und Regelungstechnik. Am Ende kannst du einfache GuD-Kreislaufmodelle in Ebsilon erstellen und analysieren, Szenarien am Simulator bearbeiten sowie einfache Regelkreise für Temperatur- und Füllstandsregelung aufbauen.4 ECTSruns this semesterMW2203Laboratoriumsmedizin - Grundlagen und TechnologienNo ratings for this module yet.Lab Courses - General4 ECTSno date this semesterME0282Leichtbau (Praktikum)No ratings for this module yet.Lab Courses - GeneralIm Praktikum lernst Du praktische Testmethoden und Messtechnik zur statischen und dynamischen Untersuchung von Leichtbaustrukturen kennen. Du führst Versuche an Werkstoffproben und Bauteilen durch, ermittelst modale Daten und interpretierst die Ergebnisse im Vergleich zu vorhandenen Rechenergebnissen. Am Ende kannst Du die Methoden eigenständig anwenden und Ergebnisse technisch dokumentieren.4 ECTSno date this semesterMW0283LogistikNo ratings for this module yet.Lab Courses - GeneralIm Praktikum Logistik arbeitest du an sieben Terminen an konkreten Aufgaben aus der innerbetrieblichen Logistik: Kommissionierung, RFID, Lean-Logistics-Planspiel, Wertstromdesign, Pufferdimensionierung und Fallbeispiele zur Prozessoptimierung. Am Ende kannst du Kommissionierfunktionen und Prozesssteuerungen unterscheiden, RFID-Anwendungen bewerten, Wertstromanalysen durchführen und analytische Methoden zur Pufferdimensionierung anwenden.4 ECTSno date this semesterMW0284MechanikpraktikumNo ratings for this module yet.Lab Courses - GeneralIm Mechanikpraktikum vertiefst du Mechanikkenntnisse im Bereich Dynamik und Schwingungen. Du führst fünf laborpraktische Versuche zu Trägheitsmomenten, Auswuchten, parametererregten und selbsterregten Schwingungen sowie zur Regelung eines Balancierstabs durch und lernst, Schwingungsphänomene physikalisch zu interpretieren und zuzuordnen.4 ECTSno date this semesterMW0285Medizintechnik in der Herz- und GefäßchirurgieNo ratings for this module yet.Lab Courses - General4 ECTSno date this semesterMW1009Messen von Eigenspannungen und Verformungen - BlockpraktikumNo ratings for this module yet.Lab Courses - GeneralIm Modul erhältst du einen praxisorientierten Überblick über in der Produktionstechnik eingesetzte Messverfahren zur Erfassung von Eigenspannungen und Verformungen. Schwerpunkte sind Dehnungsmessstreifen (Applikation, Schaltungsarten, Messprozess) sowie optische Messverfahren; ergänzt wird das Praktikum durch eine Exkursion. Am Ende kannst du die behandelten Messverfahren verstehen und praktisch anwenden.4 ECTSno date this semesterMW1117Messtechnik-MikrotechnikNo ratings for this module yet.Lab Courses - GeneralDu arbeitest an mikrotechnischen Versuchsaufbauten und lernst Mess- und Prüfmethoden für Mikrosysteme anzuwenden. Am Ende kannst Du Steuerungen aufbauen, Mikrocontroller programmieren und die Funktion von Mikrosystemen mit elektrischen und optischen Messverfahren nachweisen.4 ECTSno date this semesterMW0687Methoden der Zellkultivierung und biomedizinischen AnalytikNo ratings for this module yet.Lab Courses - GeneralDu lernst grundlegende Techniken der medizinisch relevanten Zellbiologie und setzt Zellkulturen eigenständig für verschiedene Versuche an. Du arbeitest mit Licht- und Fluoreszenzmikroskopie, bestimmst Zellzahlen und führst photometrische Stoffwechselmessungen durch. Außerdem planst du Versuche, dokumentierst deine Arbeit und wertest die Daten aus.4 ECTSno date this semesterMW1949MobilitätsdatenanalyseNo ratings for this module yet.Lab Courses - GeneralDu lernst, wie Mobilitätsdaten gesammelt, vorverarbeitet, analysiert und visualisiert werden. Schwerpunkt sind GIS/OSM-Methoden, räumlich-zeitliche Auswertungen (z. B. Hotspots, Clustering, Heatmaps) sowie einfache Machine-Learning-Verfahren zur Klassifikation von Fortbewegungsarten. Am Ende kannst du eine Datenanalyse-Pipeline für Mobilitätsdaten mit Open-Source-Software aufbauen und eigene Mobilitätsaufzeichnungen auswerten.4 ECTSruns this semesterMW2436Modellierung von Lithium-Ionen-ZellenNo ratings for this module yet.Lab Courses - GeneralIn diesem Modul lernst Du, wie Lithium‑Ionen‑Zellen auf Basis ihrer physikalisch‑chemischen Grundlagen mit numerischen Methoden modelliert werden. Du baust Teilmodelle in COMSOL Multiphysics und verknüpfst sie mit Matlab, um ein umfassendes Zellmodell zu erstellen und mit Messdaten zu validieren.5 ECTSruns this semesterEI74491Moderne Methoden der RegelungstechnikNo ratings for this module yet.Lab Courses - GeneralIm Praktikum setzt du moderne Regelungsverfahren an realen mechatronischen und verfahrenstechnischen Laboraufbauten um. Du arbeitest mit MATLAB/Simulink und Echtzeitsystemen (z.B. dSPACE, Speedgoat), entwirfst und testest Regler für verschiedene Versuchsaufbauten und lernst, das Verhalten geregelter Systeme zu beurteilen und geeignete Parameter zu finden.4 ECTSno date this semesterMW0573MotorsteuergeräteNo ratings for this module yet.Lab Courses - GeneralIn diesem Praktikum vertiefst Du praxisnah Kenntnisse zur Steuerung und Regelung von Verbrennungsmotoren. Du lernst Grundlagen der Funktionsentwicklung und Applikation elektronischer Motorsteuergeräte sowie den Umgang mit Sensorik, Aktorik und Real-Time-Systemen und testest Deine entwickelten Funktionen am Motorprüfstand.4 ECTSno date this semesterMW2077Numerische Akustik in PythonNo ratings for this module yet.Lab Courses - GeneralDu implementierst die Randelementemethode (BEM) für akustische Fragestellungen und analysierst damit typische Probleme wie stehende Schallwellen, Wanderwellen und die Schallabstrahlung einer pulsierenden Kugel. Am Ende kannst du numerische Akustikprobleme mit selbstentwickeltem Code lösen, Ergebnisse auswerten und interpretieren.4 ECTSruns this semesterMW2414PPS-PraktikumNo ratings for this module yet.Lab Courses - GeneralDu beschäftigst dich mit Planung und Steuerung von Produktionsabläufen. Das Modul vermittelt die Grundlagen der Produktionsprogramm-, Bedarfs- und Prozessplanung sowie Auftragsfreigabe und -überwachung und lässt dich die Methoden in einem digitalen Planspiel anwenden und präsentieren. Am Ende kannst du eine durchgängige Produktionsplanung durchführen und Ergebnisse fachgerecht präsentieren.4 ECTSno date this semesterMW0293Praktikum Additive FertigungNo ratings for this module yet.Lab Courses - GeneralIn diesem Praktikum lernst du die Grundlagen und Anwendungen der Additiven Fertigung kennen. Am Ende kannst du Bauteile für additive Verfahren konstruieren, verfahrensspezifische Einschränkungen einschätzen, geeignete Einsatzbereiche beurteilen und einfache Wirtschaftlichkeitsüberlegungen anstellen.4 ECTSruns this semesterMW2233Praktikum AutomatisierungstechnikNo ratings for this module yet.Lab Courses - GeneralIm Praktikum Automatisierungstechnik vertiefst Du die Inhalte aus der Vorlesung „Automatisierungstechnik 1“ und übst deren Anwendung an einer realitätsnahen Anlage mit Industriekomponenten. Du arbeitest im Zweierteam an einer Station und führst über fünf Termine die komplette Inbetriebnahme der Anlage durch. Am Ende kannst Du Engineering- und Inbetriebnahmeaufgaben automatisierungstechnischer Systeme selbstständig lösen und moderne Standards und Methoden anwenden und bewerten.4 ECTSno date this semesterMW0262Praktikum BatterieproduktionNo ratings for this module yet.Lab Courses - GeneralIn diesem Praktikum lernst Du die Funktionsweise, Materialsysteme und die komplette Prozesskette der Herstellung von Lithium‑Ionen‑Batterien kennen. Du stellst Elektroden her, fertigst kleinformatige Zellen, testest diese und kannst am Ende Herstellungsparameter bewerten sowie Maßnahmen zur gezielten Beeinflussung von Zellparametern entwickeln.4 ECTSruns this semesterMW2430Praktikum Digitaler Werkzeugmaschinen-ZwillingNo ratings for this module yet.Lab Courses - GeneralIn diesem Praktikum baust du einen digitalen Zwilling einer spanenden Werkzeugmaschine auf. Du entwirfst und konstruierst Bauteile in SolidWorks, analysierst Struktur und Schwingungen mit FEM in ANSYS und legst Achsregler in MATLAB aus, ergänzt durch experimentelle Versuche zum dynamischen Verhalten.4 ECTSno date this semesterMW1379Praktikum EchtzeitkommunikationNo ratings for this module yet.Lab Courses - GeneralIm Praktikum Echtzeitkommunikation lernst du die Bedeutung und Einsatzgebiete zeitkritischer Kommunikation in technischen Systemen kennen. Du arbeitest ein aktuelles Thema aus einer Vorschlagsliste aus, erstellst eine schriftliche Ausarbeitung, führst ein Review durch und präsentierst die Ergebnisse. Dabei werden dir die notwendigen Grundlagen vermittelt und Fortschritte in Einzelgesprächen besprochen.4 ECTSno date this semesterMW2275Praktikum ElektromobilitätNo ratings for this module yet.Lab Courses - GeneralDu lernst die Grundlagen und Komponenten der Elektromobilität kennen und setzt dies praktisch um. Im Praktikum vermittelst du sowohl das Grundwissen zu Batterien, Ladeinfrastruktur, Leistungselektronik und Antrieb als auch die Arbeit an einem Gesamtfahrzeugmodell (Schwerpunkt: Tesla Model 3). Am Ende kannst du Komponenten messen, Simulink-Modelle erstellen und diese mit realen Messdaten vergleichen.4 ECTSno date this semesterMW1633Praktikum Entwicklungstools für Autonomes FahrenNo ratings for this module yet.Lab Courses - GeneralIn diesem Praktikum arbeitest Du an Entwicklungswerkzeugen und -methoden für autonomes Fahren. Du lernst, Funktionen in C++ zu implementieren und mit ROS2, Git/GitLab, Open-Source-Tools, Docker und dem CARLA-Simulator zu testen und zu validieren. Am Ende kannst Du entwickelte Fahrerassistenzfunktionen simulationstechnisch untersuchen, evaluieren und in Realversuchen testen.4 ECTSno date this semesterED150041Praktikum Experimentelle Untersuchung geregelter elektrischer AntriebeNo ratings for this module yet.Lab Courses - GeneralDu untersuchst und optimierst Steuer- und Regelverfahren für elektrische Antriebssysteme. Konkret arbeitest du an einem digital geregelten Gleichstromantrieb (Strom-, Erreger- und Spannungsregelung im Feldschwächbetrieb sowie Drehzahlregelung) und an einem Drehstromantrieb (feldorientierte Drehmomentregelung und Drehzahlregelung). Am Ende kannst du Regler entwerfen, Messdaten auswerten und Antriebssysteme in Betrieb nehmen.6 ECTSno date this semesterEI7406Praktikum FahrzeugkonzeptentwicklungNo ratings for this module yet.Lab Courses - GeneralDu durchläufst in Gruppen alle Phasen der Fahrzeugkonzeptentwicklung an einem konkreten Szenario. Du lernst Werkzeuge und Simulationsmethoden zur Konzipierung kennen, entwirfst eigenständig ein auf Rahmenbedingungen abgestimmtes Fahrzeugkonzept und präsentierst es.4 ECTSno date this semesterMW2379Praktikum FaserverbundwerkstoffeNo ratings for this module yet.Lab Courses - GeneralDu lernst Aufbau, Materialeigenschaften und Fertigungsverfahren für Faserverbundbauteile kennen und stellst in Gruppen ein eigenes Bauteil von der Konzeption über Berechnung bis zum Bruchtest her. Am Ende kannst du Materialien und Fertigungsverfahren auswählen, ein Bauteil auslegen, fertigen und seine mechanischen Eigenschaften verifizieren.4 ECTSruns this semesterMW2471Praktikum für mechatronische Entwicklungsprozesse und ProjektmanagementNo ratings for this module yet.Lab Courses - GeneralIn diesem Modul lernst Du, mechatronische Entwicklungsprojekte zu planen und zu leiten, Grundlagen des Systems Engineering anzuwenden sowie praktische Kenntnisse in Roboterprogrammierung (am Beispiel LEGO Mindstorms) und Umgebungswahrnehmung mobiler Roboter zu erwerben. Du übst außerdem Projektmanagementpraxis und Präsentationstechniken und setzt das Gelernte in einer betreuten Projektarbeit mit Schüler:innen um.4 ECTSno date this semesterED160035Praktikum GießereitechnikNo ratings for this module yet.Lab Courses - GeneralDu erhältst einen praxisorientierten Überblick über die wichtigsten Gießverfahren des Maschinenbaus, lernst industrielle Einsatzgebiete kennen und führst eigene Gießversuche durch. Am Ende kannst Du Gießverfahren erklären, gussgerechte Bauteilkonstruktionen beurteilen und einfache Gießereisimulationen durchführen und auswerten.4 ECTSno date this semesterMW0279Praktikum Grundlagen der LuftfahrtpraxisNo ratings for this module yet.Lab Courses - GeneralIn diesem Praktikum erhältst du grundlegendes, praxisrelevantes Wissen der zivilen Luftfahrt, das nicht in den technischen Vorlesungen behandelt wird. Du lernst Inhalte aus Bereichen wie Luftrecht, Meteorologie, Navigation, Flugplanung, Human Factors und Lufttüchtigkeit, die praxisnah vermittelt werden und dem Theoriestoff der PPL entsprechen. Am Ende bist du in der Lage, die gelernten Verfahren und Methoden in den genannten Themenfeldern anzuwenden.4 ECTSruns this semesterMW1007Praktikum Grundlagen Elektrischer FahrzeugantriebeNo ratings for this module yet.Lab Courses - GeneralIn diesem Praktikum lernst Du Messverfahren, Prüfstandsaufbau und Datenauswertung für elektrische Fahrzeugantriebe praktisch kennen. Am Ende kannst Du Elektromotoren und deren Umrichter an Prüfständen vermessen, Messdaten erfassen, analysieren und visualisieren sowie die Wirkung von Komponenten im Systemeinbau beurteilen.4 ECTSno date this semesterED150045Praktikum Industrielle Softwareentwicklung für Ingenieure / C++No ratings for this module yet.Lab Courses - GeneralDu lernst, wie man Software für eingebettete Systeme entwickelt, mit Schwerpunkt auf objektorientierter Programmierung in C++. Dazu werden C-Grundkenntnisse aufgefrischt und um C++-Techniken sowie die Anbindung von Sensorik, Aktorik und Peripherie erweitert. Am Ende kannst du eigenständig objektorientierte C++-Programme für eingebettete Systeme entwickeln und grundlegende Komponenten anbinden.4 ECTSno date this semesterMW0450Praktikum Kommunikationssysteme in der AutomatisierungNo ratings for this module yet.Lab Courses - General4 ECTSno date this semesterMW1730Praktikum MehrkörpersimulationNo ratings for this module yet.Lab Courses - GeneralDu vertiefst die Mehrkörperdynamik durch eigene Modellbildung und numerische Umsetzung. Am Ende kannst Du komplexe mechanische Mehrkörpersysteme modellieren und in Matlab/Octave simulieren sowie die zugrundeliegenden numerischen Verfahren beurteilen.4 ECTSno date this semesterMW0847Praktikum ModellierenNo ratings for this module yet.Lab Courses - GeneralIn diesem Praktikum lernst Du manuelle Modellier- und Formgebungsverfahren für dauerbelastbare Werkstoffe kennen und anzuwenden. Am Ende kannst Du Prototypen und Replikate mit Kunststoffen, Silikonen, Klebstoffen und Abformmaterialien herstellen und die passenden Materialien nach ihren Eigenschaften auswählen.4 ECTSno date this semesterMW2281Praktikum Nachhaltige ProduktionNo ratings for this module yet.Lab Courses - GeneralDu beschäftigst dich mit Grundlagen und Methoden zur nachhaltigen industriellen Produktion. Du lernst, Transparenz zu schaffen (z. B. Life Cycle Assessment), menschenzentrierte Produktion, industrielle Energiesysteme sowie Kreislaufwirtschaft und Demontagestrategien zu analysieren und anzuwenden. Am Ende kannst du komplexe Nachhaltigkeitsprobleme ganzheitlich bewerten und begründete Handlungsempfehlungen entwickeln und kommunizieren.4 ECTSruns this semesterED160064Praktikum Numerische StrömungssimulationNo ratings for this module yet.Lab Courses - GeneralDu arbeitest mit der kommerziellen CFD-Software ANSYS-CFX zur Lösung praktischer fluidmechanischer Fragestellungen. Am Ende kannst Du gegebene Rechengitter importieren, Rand- und Startbedingungen setzen, geeignete physikalische und numerische Modelle wählen, Simulationen durchführen, Ergebnisse per Postprocessing auswerten und deren Qualität kritisch beurteilen.4 ECTSruns this semesterMW1846Praktikum Schlanke ProduktionNo ratings for this module yet.Lab Courses - GeneralDu lernst die Grundlagen und Methoden der schlanken Produktion (Lean) kennen und wendest sie praktisch in einer realen Produktionsumgebung an. Am Ende kannst du Wertströme analysieren, ein Wertstromdesign für einen Zielzustand erstellen und ergänzende Lean-Werkzeuge zur Gestaltung und Fehlervermeidung einsetzen.4 ECTSruns this semesterMW1125Praktikum Simulation geregelter elektrischer AntriebssystemeNo ratings for this module yet.Lab Courses - GeneralDu führst eine Reihe von rechnergestützten Simulationsversuchen zu mechatronischen Antriebssystemen durch. Am Ende kannst du Modelle elektrischer Motoren aufbauen, Regelungen entwerfen, diese mit Simulationswerkzeugen (z.B. Matlab/Simulink) implementieren, parametrieren und Simulationsergebnisse analysieren.6 ECTSno date this semesterEI7368Praktikum Simulation von LogistiksystemenNo ratings for this module yet.Lab Courses - GeneralDu lernst, Logistik- und Produktionssysteme mit dem Simulationsprogramm Plant Simulation aufzubauen und zu analysieren. Am Ende kannst du einfache bis mehrstufige Produktionsmodelle selbstständig erstellen, Engpässe identifizieren und Maßnahmen zur Bestands- und Prozessoptimierung ableiten.4 ECTSruns this semesterMW0960Praktikum SimulationstechnikNo ratings for this module yet.Lab Courses - GeneralIm Praktikum Simulationstechnik modellierst und simulierst du technische Systeme mit Matlab/Simulink und Stateflow. Du setzt kontinuierliche und ereignisgesteuerte Anteile zu hybriden Modellen zusammen und optimierst deren Betrieb mittels Matlab-Skripten.4 ECTSruns this semesterMW0447Praktikum Systems EngineeringNo ratings for this module yet.Lab Courses - GeneralDu wendest die Grundlagen des modellbasierten Systems Engineerings praktisch an, indem du im Rahmen eines konkreten Satellitenprojekts Mission und relevante Subsysteme modellierst und auslegst. Am Ende kannst du ein einfaches Satellitenmodell erstellen, eine einfache Satellitenmission planen und technische Fragestellungen mit dem Concurrent Engineering Vorgehen bearbeiten.4 ECTSno date this semesterMW0259Praktikum Testen in der AutomatisierungstechnikNo ratings for this module yet.Lab Courses - GeneralDu lernst Methoden und Werkzeuge zum Testen automatisierter, produktionstechnischer Systeme. Das Praktikum umfasst Testdefinition, Testdurchführung, -dokumentation und -auswertung sowohl auf Ebene der Steuerungssoftware (IEC 61131-3/Unit-Tests) als auch für integrierte Software‑Hardware‑Systeme bis hin zu Abnahmetests. Am Ende kannst Du Testverfahren praktisch anwenden und erhältst Einblicke in aktuelle Forschungsthemen wie modellbasiertes Testen und Testautomatisierung.4 ECTSno date this semesterMW2276Praktikum VerfahrenstechnikNo ratings for this module yet.Lab Courses - GeneralIn diesem Praktikum lernst du die Grundoperationen der thermischen Verfahrenstechnik praktisch an Labor- und Technikumssystemen kennen. Am Ende kannst du die relevanten Anlagenprinzipien beschreiben, Messungen planen und durchführen sowie experimentelle Ergebnisse mit der Theorie verknüpfen und bewerten.4 ECTSno date this semesterMW0992Prozessführung und Aufbau additiver Fertigungsanlagen von KunststoffbauteilenNo ratings for this module yet.Lab Courses - GeneralIn diesem Modul lernst Du die Grundlagen und Prozesskette der additiven Fertigung mit Schwerpunkt auf extrusionsbasiertem Fused Filament Fabrication (FFF). Du verstehst Materialien, Anlagenaufbau und -betrieb und kannst am Ende selbst einfache Bauteile konstruieren, einen FFF-3D-Drucker zusammenbauen, in Betrieb nehmen und Fertigungsversuche durchführen sowie Druckprozesse optimieren.4 ECTSno date this semesterED110060RAMSIS PraktikumNo ratings for this module yet.Lab Courses - GeneralDu lernst, ergonomische Produktauslegung mit dem digitalen Menschmodell RAMSIS NG anzuwenden. Am Beispiel der Fahrerplatzgestaltung eines BMW Mini und weiterer Arbeitsumgebungen übst Du, Innenräume und Produkte anthropometrisch zu bewerten und Fahrzeuge vom Menschen her zu konstruieren.4 ECTSno date this semesterMW0408Raumfahrtantriebe PraktikumNo ratings for this module yet.Lab Courses - General4 ECTSno date this semesterMW2293Rechnergestützte Entwicklung, Konstruktion und Fertigung - CAE/CAD/CAMNo ratings for this module yet.Lab Courses - GeneralIn diesem Modul lernst du, wie 3D-CAD-Modelle systematisch aufgebaut und parametrisch genutzt werden und wie sich daraus Fertigungsdaten für CNC-Bearbeitung ableiten lassen. Du kannst nach Abschluss Bauteile und Baugruppen modellieren, NC-Programme manuell und mit CAM-Software erstellen sowie Arbeits- und Prüfpläne entwickeln.4 ECTSruns this semesterMW0266Reglerimplementierung auf MikrocontrollernNo ratings for this module yet.Lab Courses - GeneralDu lernst, wie sich kostengünstige 8‑Bit‑Mikrocontroller zur Implementierung von Regelungen und Steuerungen nutzen lassen. Nach dem Praktikum kannst du selbständig embedded C‑Code für Peripherie, Sensorfusion, digitale PID‑Regler, Odometrie und Trajektorienverfolgung auf Mikrocontrollern entwickeln und testen.4 ECTSruns this semesterMW1340Schweißtechnisches PraktikumNo ratings for this module yet.Lab Courses - GeneralIn diesem Modul erwirbst Du praktische und theoretische Kenntnisse zu modernen Schweißverfahren und zur Schweißnahtprüfung. Du lernst verschiedene Prozesse (MIG/MAG, TIG, Rührreibschweißen, Remote-Laserstrahlschweißen), Schweißnahtgestaltung sowie Prüf- und Auswertemethoden anzuwenden und geeignete Prozessparameter auszuwählen.4 ECTSruns this semesterMW1126Seminar für ProduktionsmanagementNo ratings for this module yet.Lab Courses - GeneralIn diesem Seminar lernst du zentrale Methoden der Fabrikplanung und des Produktionsmanagements praktisch anzuwenden. Am Ende bist du in der Lage, Standort-, Logistik-/Supply-Chain-, Montage-/Fertigungssystem- sowie Struktur- und Layoutplanungen durchzuführen und Fallstudien lösungsorientiert im Team zu bearbeiten und zu präsentieren.4 ECTSruns this semesterMW1010Simulation von CompositesNo ratings for this module yet.Lab Courses - GeneralIm Modul lernst Du, Simulationen von Fertigungs- und Strukturprozessen für CFK-Bauteile aufzubauen und auszuwerten. Du vertiefst theoretische Grundlagen (Mikro-/Mesomechanik, Laminattheorie, Versagensmodellierung) und wendest diese praktisch an, z. B. bei Preform- und Liquid-Composite-Moulding-Simulationen sowie fertigungsgerechter Optimierung.4 ECTSno date this semesterMW1382Steuerung und Messwerterfassung mit LabVIEWNo ratings for this module yet.Lab Courses - GeneralDu arbeitest mit der Software LabVIEW zur Messwerterfassung, Steuerung und Auswertung typischer messtechnischer Aufgaben der technischen Thermodynamik. Du lernst Programmstrukturen, Entwurfsmuster und Entwicklungsstrategien in LabVIEW kennen und wendest verschiedene Messtechniken (z. B. Temperatur, Druck, Akustik) praktisch an. Am Ende kannst du Messdaten erfassen, auswerten, visualisieren und dokumentieren sowie ein kleines Projekt im Team selbstständig durchführen und präsentieren.4 ECTSno date this semesterMW1861Thermische Strömungsmaschinen und FlugantriebeNo ratings for this module yet.Lab Courses - GeneralDu arbeitest im Team an einem Experimentsthema aus dem Bereich thermischer Strömungsmaschinen und Flugantriebe, führst Messungen am Prüfstand oder im Labor durch und präsentierst die Ergebnisse. Am Ende kannst du verschiedene Strömungsmesstechniken anwenden, ihre Vor- und Nachteile einschätzen und Messgenauigkeiten sowie Anwendungsmöglichkeiten experimenteller Untersuchungen kritisch bewerten.4 ECTSno date this semesterMW0288Umformtechnik-PraktikumNo ratings for this module yet.Lab Courses - GeneralIm Praktikum Umformtechnik lernst du Grundlagen der Werkstoffkunde und deren Bedeutung für verschiedene Umformverfahren kennen. Anhand von Demonstrationen und Versuchen (z. B. Tiefziehen, Massivumformung, Innenhochdruckumformung) siehst du die praktische Anwendung und Auswirkungen auf Blechwerkstoffe. Ergänzt wird das Praktikum durch Vorträge von Industrievertretern und eine ganztägige Exkursion.4 ECTSno date this semesterMW0308WeltraumthermalsimulationNo ratings for this module yet.Lab Courses - GeneralDu lernst die Grundlagen der Wärmeübertragung und Thermalkontrolle von Raumfahrzeugen sowie die Erstellung und Auswertung thermischer Modelle. Schwerpunkt ist die Anwendung der industrieweit genutzten Software ESATAN TMS an einem CubeSat-Fallbeispiel und die Validierung der Simulationsergebnisse durch Thermal-Vakuum-Tests im Labor.4 ECTSno date this semesterMW2079Werkzeugmaschinen PraktikumNo ratings for this module yet.Lab Courses - GeneralIm Praktikum lernst du Aufbau, Betrieb und Instandhaltung von Werkzeugmaschinen praktisch kennen. Du führst Zerspankraftmessungen und dynamische Analysen durch, erstellst eigene NC‑Programme und analysierst den Energieverbrauch sowie Möglichkeiten zur energetischen Optimierung von Maschinen.4 ECTSno date this semesterMW0315